书名 | 《钢结构设计规范》 | 作者 | 中国工程建设标准化协会组织 |
---|---|---|---|
类别 | 图书 > 建筑 > 标准和规范图书 > 工具书 > 标准 | 页数 | 246 |
出版社 | 中国建筑工业出版社 | 出版时间 | 2006-09-01 |
装帧 | 平装 | 开本 | 16开 |
版次 | 1 |
1 General prinCIPles
2 Terms and symbols
2.1 Terms
2.2 Symbols
3 Basic design stipulations
3.1 Design principles
3.2 Load and calculation of load effects
3.3 Material selection
3.4 Design indices
3.5 Provisions for deformation of structures and structural members
4 Calculation of flexural members
4.1 Strength
4.2 Overall stability
4.3 Local stability
4.4 Calculation of built-up girder with webs taking accout of post-buckling strength
5 Calculation of axially loaded members and members subjected to combined axial load and bending
5.1 Axially loaded members
5.2 Members subjected to combined axial load and bending
5.3 Effective length andallowable slenderness ratio
5.4 Local stability of compression members
6 Fatigue calculation
6.1 General stipulations
6.2Fatigue calculation
7 Calculation of connections
7.1 Welded connection
7.2 FAStener connection
7.3 Flange connection of built-up I-section
7.4 Beam-to-column rigid connection
7.5 Calculation of connected plates at joints
7.6 Supports
8 Detailing requirements
8.1 General stipulations
8.2 Welded connection
8.3 Bolted riveted connections
8.4 Structural members
8.5 Requirements for crane girders and crane trusses
8.6 Large span roof structures
8.7 Requirements for preventing brittle fracture UNDER low temperature
8.8 Fabrication, transportation and erection
8.9 Protection and heat insulation
9 Plastic design
9.1 General stipulations
9.2 Calculation of members
9.3 Allowable slenderness ratio and detailing requirements
10 steel tubular tructures
10.1 General stipulations
10.2 Detailiing requirements
10.3 Capacity of members and joints
11 Composite steel and concrete beams
11.1 General stipulations
11.2 Design of compolite beams
11.3 Calculation of shear connectors
11.4 Calculation of deflection
11.5 Detailing requirements
Appendix A Allowable deflection of structures of structural members
Appendix B Overall stability factor of beams
Appendix C Stability factor of axial compression memebers
Appendix D Effective length factor for columns
Appendix E Classification of memebers and connections for fatigue calculation
Appendix F Stability calculation of truss gusset plate subject to compressive force of the diagonalweb member
Explanation of wording in this Code
市场价 | 信息价 | 询价 |
General principles,Terms and symbols,Basic design stipulations,Calculation of flexural members,Calculation of axially loaded members and members subjected to combined axial load and bending
钢结构设计规范有哪些
钢结构设计规范有:1、《钢结构设计规范》(GB50017-2003) ;2、《冷弯薄壁型钢结构设计规范(GBJ18-87)》; 3、《高层民用建筑钢结构技术规程(JGJ99-98)》 ;4、《门式刚架...
钢结构设计规范
刚好有,希望对你有用。
最新钢结构设计规范是什么
目前市面上通用的最基础的钢结构设计规范是GB50017-2003,有专门的《钢结构设计规范》这本书,大家可以通过这本书具体的了解一下。其它的像网络结构、门式钢架、验收规范、钢结构焊接标准等等这些也有自...
最新钢结构设计规范?
目前市面上通用的最基础的钢结构设计规范是GB50017-2003,有专门的《钢结构设计规范》这本书,大家可以通过这本书具体的了解一下。其它的像网络结构、门式钢架、验收规范、钢结构焊接标准等等这些也有自...
最新钢结构设计规范是什么?
钢结构设计规范 目前市面上通用的最基础的钢结构设计规范是GB50017-2003,有专门的《钢结构设计规范》这本书,大家可以通过这本书具体的了解一下。其它的像网络结构、门式钢架、验收规范、钢结构焊接标...
《钢结构设计规范》GBJ17-88
基本信息
作 者: 崔佳 编 萧正辉 译
版 次: 1
页 数: 346
装 帧: 平装
开 本: 16开
所属分类: 图书>建筑>标准和规范
内容简介
《钢结构设计规范理解与应用》介绍了《钢结构设计规范》GB50017-2003中对材料、计算方法以及构造要求等的理论和试验依据,力图帮助读者对新规范有比较系统、全面和清晰的理解。同时,还介绍了在实际工程中如何具体应用规范条文,以及在应用中应注意的一些问题。为适合广大工程技术人员阅读,《钢结构设计规范理解与应用》在公式推导和规范修订背景材料介绍中,较全面具体,但对繁琐的数学、力学问题未进行详细的叙述,只指明出处供读者查阅。全书共分十一章,除第一、二章外,其余各章的编排及章名与规范正文相一致,以便对照阅读。《钢结构设计规范理解与应用》可供建筑结构设计人员使用,也可供相关技术人员及高校师生学习、参考。
钢结构设计规范所属类别科学文化图书
最低价格¥33.60在新华书店
扫码下载
免费看价格